Industrial Wet Dry Vacuum Cleaner Motor Brushless

Feature:

Model:

其他信息

Brand

Faradyi

Model

B32

Voltage

110V 220-240V AC

Power

1200W

Vacuum Level

>28KPa

Flow Rate

>3.5m³/min

RPM

25000rpm/min

Thanks for sharing it !

Proudct Information:

Description

The Multi-Purpose Vacuum for Thorough Home Cleaning

This versatile vacuum cleaner tackles dirt and dust in every room of your home. Use it on carpets, hard floors, furniture, ceilings, and more for whole-house cleaning convenience.

With powerful suction, the vacuum is ideal for deep cleaning carpets in high traffic areas like hallways and stairs. Easily transition to hard floors in kitchens and bathrooms without missing a beat. The lightweight design makes cleaning bedrooms, home offices, and other areas effortless.

Convenient Installation and Maintenance

Installing this vacuum is a breeze – it can be fully assembled in just minutes. The convenient cord wrap and clip make storage neat and tidy.

The large capacity dust bin minimizes interruptions while cleaning. It disassembles easily for quick dumping and rinsing. With washable filters, you can keep your vacuum running at peak performance.

Thoughtful Design for Optimal Cleaning Power

This vacuum features an ergonomic handle for comfortable extended cleaning sessions. The low profile design cleans under furniture with ease.

Powerful LED lights illuminate hidden dirt in dark corners and edges. With a complete set of attachments, you can clean every nook, cranny, and surface throughout your home.

Experience the versatility of whole-house cleaning with this thoughtfully designed vacuum cleaner. Tackle every cleaning task with powerful suction and deluxe convenience features.

Faradyi Motors Service

How to use the motor

1. Use tolerance: pay attention to the use range of voltage and current, and use the motor under the conditions specified in this standard, otherwise the life of the motor will be reduced.
2. Handling the motor: handle it with care, and use the motor casing as much as possible.
3. Motor wiring: the red lead wire is connected to the positive pole, and the black lead wire is connected to the negative pole. If the connection is reversed, the motor will rotate in the opposite direction.
4. Overload: Use it within the specified load range as much as possible. It is strictly forbidden to run the motor in a stalled state or close to the stalled state for a long time, otherwise the motor will burn out.
5. Motor storage:Storage temperature: 0C-40°C, storage humidity: 15%-90% RH
Avoid placing it in an environment with high temperature, high humidity and corrosive gas.
6. Motor operating temperature: 0°C-70C

Motor Precautions

1. When you use the motor, there must be no binding objects, such as adhesive, do not flow into the bearing through the rotating shaft, which will hinder the operation of the motor.
2. The rotation of the shaft may have the opposite effect on the life of the motor. In order to prolong the life, please check whether your load is in accordance with the regulations. Do not overload or hang items that hinder the rotation of the shaft.
3. Manufactured into an eccentric heavy radiation load, harmful to the life of the motor.
4. Do not store it in high temperature or extreme humidity, and do not place it in corrosive gas, which will reduce the effect of the motor
5. Do not run the motor in the surrounding high temperature and humidity.
6. When soldering on the positive and negative motor terminals of the power supply, the temperature of the soldering iron is 340C40C, and the heating time is within 3 seconds. Do not deform the plastic. Let the solder point flow into the motor or break the end of the wire during work, which will make the motor function decline.
7. Do not let the motor shaft get stuck. When the power is supplied, the motor will overheat in a short time and burn its accessories.
8. Supply the specified power and make sure it is within the range of measurable requirements.
9. When installing pulleys or gears, do not increase the weight abnormally when pressing them in.
10. When installing the motor, if the screw is too long, it will cause contact between the motor itself and the
rotor, which will affect the characteristics.

Related Products

Submit a Quick Quote

Don't Take Our Word for It - See What Customers Say

We strive to provide exceptional products and service. If you are satisfied with your experience, we would greatly appreciate you taking a moment to leave us a review

en_USEnglish

Product Inquiry

Product Inquiry