| Factory | Faradyi ( Accept the ODM/OEM Customization) |
|---|---|
| Model | 5215 frameless motors |
| Nominal Voltage(V) | 24 |
| Nominal Current(A) | 1.12 |
| Nominal Torque(N.M) | 0.28 |
| Nominal Speed(rpm) | 343 |
Thanks for sharing it !
Proudct Information:
Description
The Faradyi 5215 frameless inrunner motor is an engineering marvel, packing high power density into an extremely compact and lightweight package. This innovative frameless construction allows for flexible structural integration into exoskeletons, cobots, and medical devices.
At the core of its performance are the precision-wound stator coils. With an improved copper fill factor, these generate substantial torque, enabling strong dynamic responsiveness from the small motor. The high full slot rate further enhances torque generation. Hall effect sensors are integrated into the motor for precise speed and position control.
Designed for smooth and quiet operation, the 5215 has low cogging torque as well as a CleverGapTM feature with 0.5mm clearance on the stator edge. This allows clean integration and excellent functionality across diverse mechanisms and assemblies.
The high torque density enables strong dynamic performance capabilities. Combined with the slotless exterior and optimized magnetic circuit, the 5215 operates with minimal acoustic noise and vibration. It can handle high RPM operation thanks to robust winding insulation and thermal management.
Whether you need a compact yet powerful motor for a robotic arm, exoskeleton, surgical robotics, or cobot, the Faradyi 5215 frameless inrunner motor delivers exceptional performance. It’s the ultimate integrated motor solution for applications where reliability, precision, and power are paramount in a small footprint.
Faradyi Motors Service
1. Use tolerance: pay attention to the use range of voltage and current, and use the motor under the conditions specified in this standard, otherwise the life of the motor will be reduced.
2. Handling the motor: handle it with care, and use the motor casing as much as possible.
3. Motor wiring: the red lead wire is connected to the positive pole, and the black lead wire is connected to the negative pole. If the connection is reversed, the motor will rotate in the opposite direction.
4. Overload: Use it within the specified load range as much as possible. It is strictly forbidden to run the motor in a stalled state or close to the stalled state for a long time, otherwise the motor will burn out.
5. Motor storage:Storage temperature: 0C-40°C, storage humidity: 15%-90% RH
Avoid placing it in an environment with high temperature, high humidity and corrosive gas.
6. Motor operating temperature: 0°C-70C
1. When you use the motor, there must be no binding objects, such as adhesive, do not flow into the bearing through the rotating shaft, which will hinder the operation of the motor.
2. The rotation of the shaft may have the opposite effect on the life of the motor. In order to prolong the life, please check whether your load is in accordance with the regulations. Do not overload or hang items that hinder the rotation of the shaft.
3. Manufactured into an eccentric heavy radiation load, harmful to the life of the motor.
4. Do not store it in high temperature or extreme humidity, and do not place it in corrosive gas, which will reduce the effect of the motor
5. Do not run the motor in the surrounding high temperature and humidity.
6. When soldering on the positive and negative motor terminals of the power supply, the temperature of the soldering iron is 340C40C, and the heating time is within 3 seconds. Do not deform the plastic. Let the solder point flow into the motor or break the end of the wire during work, which will make the motor function decline.
7. Do not let the motor shaft get stuck. When the power is supplied, the motor will overheat in a short time and burn its accessories.
8. Supply the specified power and make sure it is within the range of measurable requirements.
9. When installing pulleys or gears, do not increase the weight abnormally when pressing them in.
10. When installing the motor, if the screw is too long, it will cause contact between the motor itself and the
rotor, which will affect the characteristics.
We strive to provide exceptional products and service. If you are satisfied with your experience, we would greatly appreciate you taking a moment to leave us a review
Faradyi manufactures high-quality brushless motors for aviation, robotics, medical, auto, machinery, new energy, and infrastructure industries globally.
Faradyi Motor Has Been Deeply Involved In The Motor Industry For Decades, Specializing In The Production Of Various Robots And Brushless Motors.Update more new news in real time~
English 
Deutsch 
Français 
日本語 
Português