- (+086) 18923470557
- [email protected]
- 7F, No.53 Fofu Road, Dalang Town, Dongguan City, Guangdong, CN，523770
| Attribute | Specification |
|---|---|
| No-load Speed (mm/s) | 15 / 30 / 45 / 60 |
| Rated Thrust (N) | 600 / 300 / 200 / 100 |
| Pulling Force (N) | 400 / 300 / 200 / 100 |
| Self-locking (Thrust, N) | 600 / 300 / 200 / 100 |
| Self-locking (Tension, N) | 400 / 300 / 200 / 100 |
| Stroke Range | 30–1000 mm (customizable) |
| Protection Level | IP43 |
| Duty Cycle | S2 — 10 minutes (intermittent) |
| Inner Tube Material | Aluminum alloy |
| Screw Type | T-type screw |
| Limit Switch | Built-in (optional magnetic induction switch) |
| Optional Features | Magnetic sensor; end-position feedback |
| Working Temperature | 0°C to +40°C |
| Noise Level | ≤ 40 dB |
| Bottom Mounting Options | CP lifting ear type; CG flat style |
| Top End Fittings | Multiple options (default non-removable) |
| Typical Use Cases | Medical equipment, office ergonomics, home automation, light industrial mechanisms |
| Speed (mm/s) | Rated Thrust (N) |
|---|---|
| 15 | 600 |
| 30 | 300 |
| 45 | 200 |
| 60 | 100 |
Note: Speed and thrust are factory-set and cannot be adjusted after delivery. During extension and retraction, the load must not exceed the selected thrust (e.g., 600N ≈ 60 kg).
| Voltage(V) | 24V DC |
|---|---|
| Model | IP600CG / IP600CP |
Thanks for sharing it !
Description
Faradyi linear electric actuators provide clean, precise push‑and‑pull motion for lifting, tilting, and positioning tasks. Engineered with a robust aluminum alloy housing and T‑type screw drive, they deliver up to 600N of thrust with strong self‑locking to keep loads safely in place when powered off. The built‑in limit switch ensures accurate end‑stroke protection, while optional magnetic sensor and end‑position feedback support integration with PLCs or smart controllers.
Key Features
linear electric actuators Performance Options
linear electric actuators Applications
linear electric actuators Installation & Integration
linear electric actuators Reliability & Safety
Why Choose Faradyi Linear Electric Actuators
Faradyi Motors Service
1. Use tolerance: pay attention to the use range of voltage and current, and use the motor under the conditions specified in this standard, otherwise the life of the motor will be reduced.
2. Handling the motor: handle it with care, and use the motor casing as much as possible.
3. Motor wiring: the red lead wire is connected to the positive pole, and the black lead wire is connected to the negative pole. If the connection is reversed, the motor will rotate in the opposite direction.
4. Overload: Use it within the specified load range as much as possible. It is strictly forbidden to run the motor in a stalled state or close to the stalled state for a long time, otherwise the motor will burn out.
5. Motor storage:Storage temperature: 0C-40°C, storage humidity: 15%-90% RH
Avoid placing it in an environment with high temperature, high humidity and corrosive gas.
6. Motor operating temperature: 0°C-70C
1. When you use the motor, there must be no binding objects, such as adhesive, do not flow into the bearing through the rotating shaft, which will hinder the operation of the motor.
2. The rotation of the shaft may have the opposite effect on the life of the motor. In order to prolong the life, please check whether your load is in accordance with the regulations. Do not overload or hang items that hinder the rotation of the shaft.
3. Manufactured into an eccentric heavy radiation load, harmful to the life of the motor.
4. Do not store it in high temperature or extreme humidity, and do not place it in corrosive gas, which will reduce the effect of the motor
5. Do not run the motor in the surrounding high temperature and humidity.
6. When soldering on the positive and negative motor terminals of the power supply, the temperature of the soldering iron is 340C40C, and the heating time is within 3 seconds. Do not deform the plastic. Let the solder point flow into the motor or break the end of the wire during work, which will make the motor function decline.
7. Do not let the motor shaft get stuck. When the power is supplied, the motor will overheat in a short time and burn its accessories.
8. Supply the specified power and make sure it is within the range of measurable requirements.
9. When installing pulleys or gears, do not increase the weight abnormally when pressing them in.
10. When installing the motor, if the screw is too long, it will cause contact between the motor itself and the
rotor, which will affect the characteristics.
Related Products
We strive to provide exceptional products and service. If you are satisfied with your experience, we would greatly appreciate you taking a moment to leave us a review
